The Xbox 360 may be considered to be the ultimate gaming console by many, but it does have its share of problems. The ‘red ring of death’ error has been a nightmare for most Xbox 360 gamers ever since the console was launched, but it is not the only problem you would come across.
Another common problem that you may witness while playing the latest games on your Xbox 360 would be the single red flashing light. In fact, the 1 red light problem is almost as common as the 3 red lights problem (the red ring of death).
Here is a look at some steps you need to follow to solve the Xbox 360 1 red light problem:
1. Check if your Xbox 360 is still under warranty. If the warranty is still functional, then it is always better to get your Xbox fixed through Microsoft. Fixing your console by yourself might void your warranty, so you have to use it while it lasts.
2. If your Xbox 360 is out of warranty, then you would need to seriously consider fixing the problem yourself. Microsoft charges a lot of money for repairs when the warranty period is over, but you can learn how to fix Xbox 360 1 red light problem quite easily. This particular problem, also known as the e74 error, is usually caused by a problematic GPU, but you do not have to disassemble your Xbox 360 just yet.
3. In most cases, you can trace the 1 red light problem to your AV cords or HANA chip. You could try using your AV chord on someone else’s Xbox 360 to see if it works properly. Alternatively, you could get it checked at your local electronics store. If your AV cord is problematic, you can replace it and solve your 1 red light problem.
4. In some cases, the 1 red light problem may occur if your hard drive is problematic. You can find out if your hard drive is the culprit by removing it from your Xbox 360 console and restarting the system. If your console works perfectly well, you could try putting back the hard drive to see if it starts up again. If your console shows the red light again after you insert your hard drive, you know where the problem lies.
5. If your AV cord checks out, it is time to test your HANA chip. This chip is located near the plug in the AV cable point on the inside of the console. Alternatively, it could also be a problem with your GPU. If this is the issue, you may have to disassemble your console to solve the problem.
You could try placing a magnet over your GPU to get it working again, but this works only if you are lucky. As you can see, the e74 error occurs either due to a faulty hard drive, AV cord, HANA chip, or GPU. In all cases, you would need a replacement of the problematic equipment for your Xbox to work again. However, if your hard drive is the one causing problems, you can still play games on your console.
Wednesday, March 28, 2012
How to fix Xbox 360 1 red light
7:15 AM
Unknown
No comments
0 comments:
Post a Comment