Monday, June 4, 2012

No Storage Devices Found on your Xbox 360 S

If you are using an Xbox 360 S that comes with a hard drive, use the following steps to ensure the hard drive is properly connected.
  1. Turn off the console.
  2. Locate and open the Hard Drive cover.
    1. Position the console horizontally looking at the front.
    2. On the right side of the console, locate the hard drive cover release which is close to the back of the console.
    3. Slide the release toward the front of the console, while pulling open the hard drive cover.


  3. Remove the Hard Drive.
    1. Pull the hard drive tab firmly until the hard drive comes out.


  4. Reconnect the Hard Drive.
    1. Insert the hard drive firmly fully until it clicks.


    2. Put the hard drive cover back on.
  5. Power on your console and see if the hard drive is now available.

How to fix Xbox 360 Hard Drive: "No Storage Device Found" error?

This problem occurs when your original Xbox 360 console does not detect a hard drive or memory unit. Typically, this error occurs when a hard drive or memory unit is not attached properly to the console.

Note If you have an Xbox 360 S console and receive this message, see the article:
Error: “No storage devices found” or similar messages on an Xbox 360 S console

If your hard drive or memory unit is not listed as a storage device on your original Xbox 360 console, try the following solutions.

If you have an Xbox 360 Hard Drive

Solution 1: Make sure your hard drive is attached

  1. Locate the hard drive on the top of your console (or on the left side, depending on how your console is oriented).

    Note Not all Xbox 360 consoles include a hard drive.

    Hard drive
  2. Make sure the hard drive is correctly attached to your console. For information about how to attach a hard drive, see the following Knowledge Base article:
  3. Turn your console off, and then turn it on again.
  4. Check if your hard drive is listed. Here's how:
    1. Go to the Settings hub, and choose System.
    2. Select Storage.
If your hard drive is not listed, try the next solution.

Solution 2: Turn your console off and back on again

  1. Turn your console off, and then remove the hard drive.

    Remove the hard drive
  2. Turn your console on, wait for it to start up, and then turn it off again.
  3. Reattach the hard drive to the console, and then turn the console on again.
  4. Check if your hard drive is listed. Here's how:
    1. Go to the Settings hub, and choose System.
    2. Select Storage.
If your hard drive is not listed, try the next solution.

Solution 3: Try another console or another hard drive

  1. Try one or both of the following:
    • Attach your hard drive to another console.
    • Attach another hard drive to your console.
  2. After you have done one of those two things, check if your hard drive is listed:
    1. Go to the Settings hub, and choose System.
    2. Select Storage.
If your hard drive is not listed, try the next solution.

How to attach or remove your original Xbox 360 hard drive

This article explains how to remove and attach an Xbox 360 hard drive. For Xbox 360 S console instructions, please see the following article:
How to add or remove your Xbox 360 S hard drive

Note When you remove or attach your Xbox 360 hard drive, avoid touching the hard disk drive bay contacts or the hard disk drive connector with your fingers or metal objects.

To remove your Xbox 360 60G hard drive

  1. Turn off your Xbox 360 console.
  2. Locate the hard drive drive on the top of your console (or on the left side, depending on how your console is oriented).

    Note Not all Xbox 360 consoles include a hard drive.

    Location of the hard drive
  3. Press the release button on the hard drive.

    Press the release button
  4. Lift the hard drive away from the console.

    Lift the hard drive

To attach your hard drive

  1. Turn off your Xbox 360 console.
  2. Position the back of the hard drive against the back of the hard drive bay.

    Note If your console did not previously have a hard drive, you will need to remove the hard drive bay cover before attaching a hard drive.

    Position the hard drive

  3. Push the front end of the hard drive down until it clicks in place.

    Push the hard drive down

How to add or remove your Xbox 360 S hard drive

This article applies to the Xbox 360 S console with an internal removable hard drive


Xbox 360 S
The Xbox 360 S 250 gigabyte (GB) console has an internal hard drive, which can be removed and replaced. The Xbox 360 S 4 GB console has internal flash memory, which is not removable. The internal hard drive can be purchased separately.

For instructions for the original Xbox 360 hard drive, see the following article:
How to attach or remove your original Xbox 360 hard drive

To add or remove your Xbox 360 Slim 250G hard drive

To locate and open the hard drive cover
  1. Turn off the console.
  2. Position the console horizontally.
  3. On the right side of the console, locate the release for the hard drive cover. It is close to the back of the console.
  4. Slide the release toward the front of the console, while pulling open the hard drive cover.

    Slide the release to open the hard drive cover

To remove the hard drive
  1. Firmly pull the tab on the hard drive until the hard drive comes out.

    Pull the tab on the hard disk firmly
  2. Replace the hard drive cover before turning the console back on.

To add a hard drive
  1. Insert the hard drive into the slot, and press firmly until you hear it click.

    Press the hard drive firmly into the slot


    Note If after you turn the console back on you receive the error message “No storage devices found,” then the hard drive might not have been inserted completely. Remove and try again.
  2. Replace the hard drive cover.

Tuesday, May 29, 2012

How to improve the Speed of Your Xbox Live Connection

Playing on Xbox LIVE can be extremely fun however; when playing online, and the game starts to slow down and freeze (also known as lag). The game can be quite frustrating. This can because by many things and this article will describe how to fix this problem.

Steps

   1. First find out what is causing your speed to slow down (lag). This can be cause by....
     # The host of the match might be far away from you and it's difficult for        you to have great signal strength with someone half-way across the world.
     # Somebody might be cheating in the game via lag-switch. Which is a modification of the Xbox Console that can scramble all the other players connection. This voids the warranty of the Xbox and can get you banned from Xbox LIVE. There are more than 100 versions of lag-switches some homemade and some bought from stores (not supposed to be used for this purpose the ones bought for stores are supposed to be used to speed up computer connection but can be solder to the Xbox and be used for the reversed purpose of slowing down others connection and speeding up yours. I will describe the different kinds at the end of the article.
     # Just a bad connection this looks similar to a lag-switch however; its really just the host connection has dropped or slowed down causing everybody to have a slow connection but, it will show the host as having full signal strength when they actually don't.

   2. Your connection may be slow, or your connection may be set to moderate or strict. This can be changed by turning off your wireless router/unplugging your network connector from Xbox. if this doesn't work than read Change Your Nat Type on Xbox Live.

   3. After identifying the problem you can try and boost connection speed.
      If the problem is lag-switch related, or host connection problems... then unfortunately there is nothing you can do to fix this.

   4. If the problem is your connection then you may need to get a better network connector for your Xbox. You may also have to close out some programs on your computer. As this can slow down connection speed across anything connected to your internet.

Wednesday, March 28, 2012

How to fix Xbox 360 overheating

The Xbox 360 is definitely a marvelous gaming device- there is no doubt about it. However, like any other gadget, the Xbox too is prone to certain technological problems. One of the most common problems that Xbox 360 owners would be aware of is the overheating issue.

Although the people at Microsoft may claim that the device does not heat up too much, the fact is a mean gaming machine like the Xbox 360 cannot stay cool consistently. Moreover, the design of the 360 makes heat dissipation problematic, so overheated Xbox 360s are not an uncommon sight. In fact, the series of red light errors that every Xbox 360 gamer dreads are more or less caused by overheating issues.

So what can you do to stop overheating problems from disrupting your gaming time? Fixing Xbox 360 overheating issues may seem to be the stuff for hardcore techies, but with the following easy steps, you too can learn how to fix Xbox 360 overheating:

    1. You first need to see if your Xbox 360 is still under warranty. If it is, then its best if you give your console over to the Microsoft technicians. If you still want to fix the console yourself, you must remember that it would require you to disassemble your Xbox 360, which voids your warranty. If you are prepared to risk that, then you can move on to the next step.

    2. The next step for fixing your 360’s overheating problem is to open up the console. First remove the front panel of the console. Once this is done, take off the top and bottom vents and then remove the side casing of the console.

    3. When the outer casing of the console has been opened up, you would be able to see the inner metal chassis. You would now have to remove the metal cover of this chassis by removing 6 screws at the periphery of the cover.

    4. Once you remove the cover, you would see the DVD drive of the Xbox 360. You now have to remove this DVD drive to reveal the CPU and GPU or graphics processing unit of the console. In most cases, the Xbox 360 overheats because of bad cooling around the GPU, so your focus is on that piece of equipment.

    5. At this point, you would need an Xbox repair kit in order to fix the overheating issue. You can get these kits anywhere and even find some online. If you do not want to get a repair kit, you will need some nylon and steel washers, long screws, and some heat sink paste.

    6. The best way to rectify the overheating problem is to improve the cooling system just a little bit. You can do this by scrapping off the old heat sink compound off the GPU and applying a thin layer of the new element.

    7. The washers are required for getting your GPU in contact with your motherboard. This is to be done as you begin assembling back your Xbox 360.

The whole process takes around 1 hour to complete, and 2 hours for most technologically challenged individuals.

How to fix Xbox 360 1 red light

The Xbox 360 may be considered to be the ultimate gaming console by many, but it does have its share of problems. The ‘red ring of death’ error has been a nightmare for most Xbox 360 gamers ever since the console was launched, but it is not the only problem you would come across.

Another common problem that you may witness while playing the latest games on your Xbox 360 would be the single red flashing light. In fact, the 1 red light problem is almost as common as the 3 red lights problem (the red ring of death).

Here is a look at some steps you need to follow to solve the Xbox 360 1 red light problem:

   1. Check if your Xbox 360 is still under warranty. If the warranty is still functional, then it is always better to get your Xbox fixed through Microsoft. Fixing your console by yourself might void your warranty, so you have to use it while it lasts.

   2. If your Xbox 360 is out of warranty, then you would need to seriously consider fixing the problem yourself. Microsoft charges a lot of money for repairs when the warranty period is over, but you can learn how to fix Xbox 360 1 red light problem quite easily. This particular problem, also known as the e74 error, is usually caused by a problematic GPU, but you do not have to disassemble your Xbox 360 just yet.

    3. In most cases, you can trace the 1 red light problem to your AV cords or HANA chip. You could try using your AV chord on someone else’s Xbox 360 to see if it works properly. Alternatively, you could get it checked at your local electronics store. If your AV cord is problematic, you can replace it and solve your 1 red light problem.

    4. In some cases, the 1 red light problem may occur if your hard drive is problematic. You can find out if your hard drive is the culprit by removing it from your Xbox 360 console and restarting the system. If your console works perfectly well, you could try putting back the hard drive to see if it starts up again. If your console shows the red light again after you insert your hard drive, you know where the problem lies.

    5. If your AV cord checks out, it is time to test your HANA chip. This chip is located near the plug in the AV cable point on the inside of the console. Alternatively, it could also be a problem with your GPU. If this is the issue, you may have to disassemble your console to solve the problem.

You could try placing a magnet over your GPU to get it working again, but this works only if you are lucky. As you can see, the e74 error occurs either due to a faulty hard drive, AV cord, HANA chip, or GPU. In all cases, you would need a replacement of the problematic equipment for your Xbox to work again. However, if your hard drive is the one causing problems, you can still play games on your console.

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | Best CD Rates
YouSayToo Revenue Sharing Community