Monday, June 4, 2012

How to add or remove your Xbox 360 S hard drive

This article applies to the Xbox 360 S console with an internal removable hard drive


Xbox 360 S
The Xbox 360 S 250 gigabyte (GB) console has an internal hard drive, which can be removed and replaced. The Xbox 360 S 4 GB console has internal flash memory, which is not removable. The internal hard drive can be purchased separately.

For instructions for the original Xbox 360 hard drive, see the following article:
How to attach or remove your original Xbox 360 hard drive

To add or remove your Xbox 360 Slim 250G hard drive

To locate and open the hard drive cover
  1. Turn off the console.
  2. Position the console horizontally.
  3. On the right side of the console, locate the release for the hard drive cover. It is close to the back of the console.
  4. Slide the release toward the front of the console, while pulling open the hard drive cover.

    Slide the release to open the hard drive cover

To remove the hard drive
  1. Firmly pull the tab on the hard drive until the hard drive comes out.

    Pull the tab on the hard disk firmly
  2. Replace the hard drive cover before turning the console back on.

To add a hard drive
  1. Insert the hard drive into the slot, and press firmly until you hear it click.

    Press the hard drive firmly into the slot


    Note If after you turn the console back on you receive the error message “No storage devices found,” then the hard drive might not have been inserted completely. Remove and try again.
  2. Replace the hard drive cover.

0 comments:

Post a Comment

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | Best CD Rates
YouSayToo Revenue Sharing Community